Expert Answers about Itasca Suncruiser Motorhome

• Troubleshooting An E5 Error Code On An Advent Air RV Air Conditioner System
• An E5 error code simply means there's a communication error between the relay box # PXXACRG12RB and the thermostat. If you're hooking it directly to the relay box without any extra wire and it's wired correctly and you're still getting the E5 error then either the relay box or thermostat is defective and needs to be replaced. Just to make sure you have it wired correctly I've listed the wire colors from the relay box and their connections on the thermostat below: Blue: A Purple: B Green:...
  view full answer...


• What Does the Return Leveler for Service Error On the Lippert Ground Control Mean
• The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590 when meet with an error can display a "Return Leveler for Service" message. This is a general code therefore I don't have any specific troubleshooting steps for this. That said, all you need to do to clear the code is press the retract button and enter button simultaneously, holding for about 3 seconds. If the error code then reappears you will need to take the system in for service as instructed by the...
  view full answer...


• How To Clear Error Codes On An Advent Air RV Air Conditioner System Thermostat
• To reset the thermostat of your Advent Air RV Air Conditioner System # ADV64FR you'll need to complete the following steps: Start with Thermostat in Off mode. Press and hold both the mode and fan button at the same time in the Off mode. Continue to press both buttons and press the power button and then release all 3 buttons. The LCD will flash On/Off while pressing all 3 buttons. Once the buttons are released the LCD will turn off and the system has been reset to factory settings and should...
  view full answer...